RGB Rock Lights Installation



Applies to both the White and RGB Surface Rock Lights

1. Layout your wiring harness through the engine bay connecting the negative(- / black wire) to the battery terminal, at this stage the positive (+ / red wire) cable can be left aside.

2. Run the harness to a central point where you plan to mount up the rock lights. The module has mounting points which can be fixed to a secure mounting surface. (The module box is splashproof and is not submersible).

3. Mount up the desired amount of rock lights around the vehicle. The rubber backing can be used as a template for any holes you may need to drill. The assembly of the rock light is best shown through the below diagram. (It is not required that all 6 rock lights are connected)


4. The dime switch on the harness can be mounted internally in the cabin or elsewhere around the vehicle. Once everything is mounted and wired up, all that is left is to connect the positive (+ / red wire) to the battery terminal.



For Bluetooth control, we recommend using the ‘STEDI RGB’ app which can be downloaded using the below link which will take you to direct links to the most recent version or alternatively searching ‘STEDI RGB’ in your devices app store. Once installed, turn your device's Bluetooth 'on' prior to opening the app.

ANDROID: Upon using the app for the first time, you will receive a notification to allow the app access to location services. This is due to Bluetooth on android devices being categorized in location services.




COLOURS: This is essentially the home screen and features a spectrum wheel, on/off control, user favourites and, warm-cool whites.

FUNCTIONS: Features including fade in/out & colour cycle are located in the style menu. The colour (solid or rainbow) input can be set with the desired speed as well as the function of the fade (fade to black or fade into the next colour).

AUDIO INPUT - MICROPHONE: Accessing the microphone will alter the brightness and colour of the lights when sound is detected.