We have gathered a few unique builds and compiled them here as an inspirational guide for those wanting to see possibilities for installation a little left of field. Keep in mind that not all of these installs are ADR and in no way, shape, or form, plug & play.
| ST3K 7.5 INCH HEADLIGHT INSTALLATION
For those thinking the impossible, check out this Nissan Silvia S15 that has an ST3K headlight upgrade! Kaz has replaced her factory high beam completely for her drift car with a pair of ST3K 7.5 inch light bars. Keep in mind that when on the track, there is no ADR for high beam. So definitely don't attempt this conversion on your daily. 
| ST3K 7.5 INCH VERTICAL MOUNT
This 70 Series LandCruiser (fitted with the Tuff bull bar), has 4 ST3K light bars mounted vertically using the vice brackets. Due to the bars on the bullbar fixed vertically in the midsection, this customer has found a creative way to not only work around the design of the bullbar but along with it.
| C4 CUBE LIGHT UPPER GRILLE
Simple yet very effective. This one is pretty sleek in terms of having that additional lighting when needed. When it's not required, it's probably very hard to tell that they are even there. This customer has done a few of the LED conversions around the car but for obvious reasons, we were pretty impressed with the 2 C4's hidden in the grille.
| ST2K 31.5 INCH x2 UPPER GRILLE
No bull bar? No problem! Because running enough light to replace the sun on the roof apparently doesn't cut it. This customer also went ahead to chop up the factory ford grille and add a pair of 2 31.5 inch ST2k's as well. Most of the install will make any new car owner cringe like hearing nails on a chalkboard. Remove the middle section (to create an opening so that the brackets can reach the mesh behind) and hold the bars as close as possible for support.
| ST3K 21.5 INCH SPORTS CAT LOWER GRILLE
A frequently asked question is regarding the lower grille light bar on this Holden Colorado Sports Cat. This Sports Cat, in particular, did come through our warehouse in order to test fit our roof rail bracket (but the lower grille light is of his own doing). From what we understand, the owner simply used the brackets (that come in the box with the ST3K) and drilled the holes into the base to cater for the light to be mounted straight in.
| MORE TO COME
Have something a little unique? Send us a message or email with some photos and you may just see your vehicle up on this blog.
